bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Ford E-Series Cutaway


  • Correct Timbren Rear Suspension Enhancement System for 2021 Class C Motorhome on Ford E-350 Chassis
  • The correct Timbren Rear Suspension Enhancement System for 2021 Class C Motorhome on Ford E-350 Chassis is part # TFER35092B.
    view full answer...

  • 2021 Ford E-Series Cutaway Motorhome Black WeatherTech All-Weather Floor Mats
  • If you're wanting black WeatherTech All-Weather Front Floor Mats for your 2021 E-450 Motorhome here is the # WTW51. These are a good choice and I've personally used these on a motorhome we have here at the shop. Be sure to check out the video I've included to see how they fit!
    view full answer...

  • Recommended Gas Shut-Off For An Emergency Situation
  • To prevent a large gas leak in the event of a line burst you would want to install a shut off valve like the GasStop Propane Emergency Shut-Off Safety Valve # GS24FR or the # GS84FR for a POL connection. This propane shut-off valve automatically turns off the gas supply if a major leak or regulator failure is detected. The pressure gauge lets you easily identify tank capacity and test for minor leaks.
    view full answer...

  • Can I Use the Vesper Steel Dual Trailer Wheel on a Class C RV on 2019 Ford E-250 Chassis
  • Yes. The Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.77" Pilot - Silver # TA56FR can be used on a Class C RV, so as long as your 2019 E-250 Cutaway has a 16" dual rear wheel with an 8 on 6-1/2 bolt pattern; as long as that is true then this will work for you. This wheel has a 3860-lbs capacity.
    view full answer...

  • Which SumoSprings Helper Springs For Rear Axle Of 2019 Ford F-450 Class C Motorhome
  • For your 2019 Ford E-450 Class C Motorhome I recommend the SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-106-47-1 you were looking at are my recommendation as they offer 4600lbs of support to your rear suspension and will help to minimize sway and body roll. I included a video of the # SSR-106-47-1 being installed for you to take a look at.
    view full answer...

  • Recommended Floor Mats for a Thor Motor Home Ford E450
  • We do have some floor mats that are made to fit a Ford E450, but just as a forewarning; since Thor designed the motor home, they could have made changes to the center console or other parts on the inside which could alter how a floor mate might fit. If Thor makes custom floor mats for your motor home, then I recommend getting those since they are made to fit your exact application. We do have a wide variety selection of floor mats which are linked for your convenience. I recommend going...
    view full answer...

  • Will the Valterra No-Fuss Flush with Check Valve Work With An Existing Flush System
  • Yes, there are multiple back check valves in a waste flush system. There is a check valve at the actual fitting on the tank and inside the vacuum breaker. If the hole on your tank has a 1"diameter which it should then the Valterra No-Fuss Flush with Check Valve part # A70 will work for you.
    view full answer...

  • Are the WeatherTech All-Weather Front Floor Mats a Fit for a 2020 Ford E-450 Thor Motorhome
  • I am happy to inform you that the WeatherTech All-Weather Front Floor Mats, part # WTW51, are a fit for your 2020 Ford E-450 Thor Motorhome. They are black with anti-skid ridges. I've linked to a video review of these below. The cleaner for these are the Cleaner and Protector Kit for WeatherTech Floor Mats, part # WT8LTC36K. I've linked to a video review of these as well.
    view full answer...

  • How to Choose Radiator Fan for Ford E-350 Chassis
  • The Flex-a-lite 16" Flex-Wave Electric Fan part # FLX236 measures 16" wide x 16-1/2" tall x 3-3/4" deep so as long as you have this much space between the radiator and engine then this fan will work great. Please note, the fan is reversible so it can be used as either a push or pull fan. In order to control the fan thermostatically you'll need the Flex-a-lite Adjustable Temperature Controller for Electric Fan part # FLX31149. If you need a different size then you can select one from the...
    view full answer...

  • How To Prevent Terrifying Sway In 2017 Coachmen Leprechaun On Ford E-450 Cutaway
  • It sounds like you are experiencing a lot of sway in the 2017 Coachman Leprechaun which is somewhat of a common issue with the factory sway bars on the Ford chassis. I recommend to replace the factory sway bars with Roadmaster Front Anti-Sway Bar part # RM-1139-176 and Roadmaster Rear Anti-Sway Bar part # RM-1139-147. The sway bars will help to keep the RV on the road when a big semi passes by bracing the frame to diminish the swaying effect. The aftermarket sway bars are far superior...
    view full answer...

  • Brake Controller Wiring Adapter for a 2023 Greyhawk on Ford E-450 Chassis
  • To install the Brake Buddy Stealth Supplemental Braking System item # HM39530 in your 2023 Greyhawk you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers item # 3034-S. This connects to the wiring harness behind the dash of your Ford E-450. I have linked a picture of the connector below. Some other parts you will need to flat tow your 2019 Jeep Cherokee are listed below: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base...
    view full answer...

  • Front Mount Hitch Receiver Recommendation for a 2021 Ford E-Series Cutaway RV
  • To add a front hitch to your RV on a 2021 Ford E-Series Cutaway chassis I recommend checking out the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This is a weld-on installation that gives you a 2" receiver that most accessories work with. Since there aren't any custom-fit hitches for the front of your RV you're going to have to go with more of a universal-type fit like this to accomplish what you're wanting to do.
    view full answer...

  • SumoSprings That Fit 2019 Thor Vegas 27.7 Motorhome Built on Ford E-450 Chassis
  • Your 2019 Thor Vegas 27.7 motorhome was built on a Ford E-450 chassis, and we do carry the correct SumoSprings for both the front and rear of your rig. What you'll need are the following: - Rear Axle: SumoSprings Solo Custom Helper Springs # SSR-130-54 - Front Axle: SumoSprings Solo Custom Helper Springs # SSF-106-47 I've added links to the install instructions, an install video and video review for you to check out as well.
    view full answer...

  • Steering Stabilizer Fit on 2021 Ford E450 Class C RV
  • I checked with Roadmaster, and the correct fit for your 2021 Ford E450 Class C RV is the Roadmaster Exact Center Steering Stabilizer # RM47MR.
    view full answer...

  • Recommended Brake Controller and Plug and Play Adapter For 2019 Ford E-Series Cutaway
  • It sounds like you have a factory 7-way on the 2019 Ford E-450 Chassis. If that is the case, you will need brake controller adapter part # 3034-P with the Prodigy P3 brake controller part # 90195. The Prodigy P3 is one of our more popular brake controller options, it features a bright LCD display screen and storable settings that allow you to store the settings of more than one trailer. If you tow more than one trailer you will not need to set the boost setting each time you are ready to tow.
    view full answer...

  • Looking for 15 x 6 Inch Wheel with 3 Inches of Back Spacing
  • A 3 inch backspacing on a 6 inch wide wheel is the same as a zero offset, where the wheel mounting pad would sit right at the centerline of the wheel's width. The Dexstar # AM20551 Mini Mod 15 x 6 wheel you'd looked at has a zero offset, which would give it 3 inches of back spacing. The wheel has a 5 on 4-1/2 inch bolt pattern. If you click the provided link, you can see a product description video featuring the # AM20551 Mini Mod wheel you'd looked at.
    view full answer...

  • Best Windshield Cover For 2021 Ford E-450 Cutaway
  • Yes, the etrailer 2-in-1 Exterior Windshield and Wiper Blade Cover - 70" Wide x 39-3/4" Tall # e98899 is confirmed to fit your 2021 Ford E450 Cutaway. You can see in the attached video that it covers the windshield very nicely on the E450. This is the largest available windshield cover for your vehicle and I definitely recommend it. My favorite feature is the reversible function. Use the laminated blue side for protecting your windshield from the winter snow, and use the reflective silver...
    view full answer...

  • Weight Capacity of the Roadmaster Dual Hitch Receiver Adapter
  • The Roadmaster Dual Hitch Receiver Adapter, 2" or 6" Drop/Rise # RM-077-6 will be able to hold your spare tire as long as you are not exceeding the tongue weight capacity of the adapter or your trailer hitch. The Roadmaster adapter has a maximum tongue weight of 400 lbs. So, as long as you are not over 400 lbs of tongue weight the adapter won't have any problems.
    view full answer...

  • Replacement Lock Cores for Mopar Roof Racks
  • The Mopar roof racks are made by Thule, so we do have replacement lock cores which will work, although they are different than the one you mentioned, which is a Yakima product. Instead, you will need need the Thule lock cores, which are available in different quantities depending on how many you need. - Quantity of 2: Thule One-Key System Lock Cylinders - Qty 2 # TH450200 - Quantity of 4: Thule One-Key System Lock Cylinders - Qty 4 # TH450400 - Quantity of 6: Thule One-Key System Lock...
    view full answer...

  • Solar Controller Upgrade For GP-PWM-10-SQ For Two 190 Watt Solar Panels
  • The GP-PWM-10-SQ is only capable of 190 watts so you wouldn't be able to add another solar panel to get more power, but we do have an option for you. What I recommend is upgrading to a 30 amp solar controller instead: - Go Power MPPT Solar Charge Controller - 30 Amp - 12V and 24V # GP72RR The # GP72RR has a max power input of 600 watts so it's more than triple what your current controller has, and will allow you to add another 190 watt panel, the Go Power Overlander # 34282182.
    view full answer...